4 Simple Ways to Keep Your Drains Clog-Free

Clogged drains can be frustrating and inconvenient for any setting. Blocked drains bring everything to a standstill and then you would have to do a lot of work to make them work as efficiently as before. The truth is that blockages can lead to expensive repairs, but they can be avoided. The fact that you are not the only person in your home who uses the sinks, showers and other amenities makes it difficult to control what happens when others use them. But there’s always something you can do to keep your floor, toilet, and sink drains clog-free.

1. Make sure the filters are always firmly in place

Overdrain filters are designed in such a way that they allow water to drain without allowing the passage of invasive materials that could clog them. Make sure these filters are of high quality and firmly in place so they don’t shift and allow other materials to pass through. Choose drains that are good enough to allow a smooth flow of water and keep all solid waste out.

2. Make sure to clean your filters

In addition to making sure they are always in place, you should also clean any solid buildup around your filters after each use. Allowing solids to remain in the filter increases the chances that they will wash down the drain, causing clogs. Remove them by hand if you are using the kitchen sink or clean them in floor drains. The rule of thumb here is to make sure the filters are as clean and clear as possible with each use.

3. Keep grease, grease and hair out of drains

Fats and grease are the common clogging material for kitchen sinks. Instead of forcibly flushing them down the drain, it’s best to have a can near your sink where you can deposit the grease and grease for proper disposal. The accumulation of fats in the pipes eventually leads to clogging, making it difficult for water to pass through smoothly. It helps to pour hot water down your drains from time to time to keep such clogs at bay, but keeping grease out is the best remedy. It’s also important to keep hair out of sinks and drains, as they can easily become clogged.

4. Stay alert to spot problems early

The earlier you can identify a drainage problem, the easier it will be to fix it before it escalates. When it comes to blocked drains, the most common signs are slower drain speeds and bubbling when water goes down the drain. If your filter is able to come off, you can try to find the materials causing the blockage or you can use a pump to alleviate the problem. If you don’t know how to fix it, call a plumber to take care of the problem before it becomes too complex and expensive. Never ignore the signs as they can lead to major damage to your drainage system that will cost you dearly in the end.